Please note: this list is most likely not complete no review of functionality is done here, it only serves as a collection of efforts Linux kernel: Type Link Available in version Devicetree Entry Pinecube https://lkml.

This page details a hardware fix for an issue that affects some early v1.1 Braveheart units (fixed since 1.2 community edition included). The issue was PinePhone_v1.1-Braveheart#Excess_power_usage_while_driving_VBUS by megi. TODO: Add more pictures and schematics, better reference the fix origin and tradeofs, remove TODOs/FIXMEs.

This page details a hardware fix for an issue that was found on early PinePhone hardware revisions (see PinePhone for an overview of the different revisions) and has been fixed since the 1.

This page details a hardware fix for an issue that was found on early PinePhone hardware revisions (see PinePhone for an overview of the different revisions) and has been fixed since the 1.

Accessories full documentation Accessories Step by Step Guides Cases POT Wifi Remote I2c Accessories Step by Step Guides Accessories Step by Step Guides Wi-Fi/Bluetooth module: Step by Step Installation Guide Acrylic Open Enclosure: Step by Step Installation Guide If you wish to stack two or more of these enclosures, the screws that serve as feet can be replaced by M8-1.

Front view of the Clusterboard (revision 2.2) The Clusterboard is a PINE64 board that makes it possible to set up a compact cluster of headless ARM-based single-board computers. It can hold up to a total of seven SOPINE or SOEDGE modules.

Android SDK for RK3566 Cross-compiling General full documentation Mainline Hardware Decoding Mainline Hardware Encoding Mali Driver Overclocking PineModems RK3399 boot sequence RK3566 EBC Reverse-Engineering U-Boot Android SDK for RK3566 Two Android SDKs are available from Pine64 for RK3566 devices:

Getting started How to Contribute Introduction full documentation Where to Report Bugs Getting started This guide is for the PINE64 devices. For device-specific information please see the corresponding device pages listed on the main page.

The Ox64 is a RISC-V based single-board computer based on the Bouffalo Lab BL808 RISC-V SoC with C906 64-bit and E907/E902 32-bit CPU cores supported by 64 MB of embedded PSRAM memory, and with built-in WiFi, Bluetooth and Zigbee radio interfaces.

The Oz64 is a low cost single-board computer based on the Sophgo SG2000 SoC with dual T-Head C906 64-bit RISC-V cores, an ARM Cortex A53 64-bit RISC CPU core and an 8051 8-bit core supported by 512 MB of embedded DRAM memory, with WiFi and Bluetooth radio interfaces.

The following add-ons are available: Keyboard Fingerprint Reader Add-on Qi Wireless Charging Add-on LoRa Add-on Protection The compatible cases can be found under: Cases The compatible screen protectors can be found under:

The PINE A64 The PINE A64 and the PINE A64+ is PINE64’s first Single Board Computer powered by Allwinner’s A64 quad-core ARM Cortex A53 64-Bit SoC. There are many Operating Systems available for the PINE A64 created by the open source community and various partner projects.

The PINE A64-LTS The PINE64-LTS is the long term supply version of the PINE A64 (+), PINE64’s first single board computer, powered by Allwinner’s A64 quad-core ARM Cortex A53 64-Bit SoC.

The PINE H64 Model A The PINE H64 Model A is a discontinued Single Board Computer by PINE64. It is powered by an Allwinner “H6” Quad-Core ARM Cortex A53 64-Bit Processor with a MALI T-722 GPU.

The PINE H64 Model B The PINE H64 Model B is a Single Board Computer by PINE64. It is powered by an Allwinner “H6” Quad-Core ARM Cortex A53 64-Bit Processor with a MALI T-722 GPU.

The Pinebook The Pinebook is an 11.6″ or 11.6″ with 1080P IPS panel or 14″ notebook powered by the same quad-core ARM Cortex A53 64-Bit Processor used in our popular PINE A64 Single Board Computer.

Pinebook Pro running Debian with MATE The Pinebook Pro is a Linux and *BSD ARM laptop from PINE64. It is built to be a compelling alternative to mid-ranged Chromebooks that people convert into Linux laptops.

The PineBuds Pro The PineBuds Pro are open firmware capable ANC wireless earbuds. Some of the notable features include their light weight, 3 Microphones, ANC (Active Noise Cancellation), ENC (Environment Noise Cancellation) and high fidelity 6mm speaker.

Pinecil is a portable soldering iron with computer controlled temperature, sleep modes, motion detection, and allows many options for power from AC supplies (USB-C, DC Barrel) to external tool/LiPo batteries.

The PineCone is a BL602 evaluation board, which was developed with the goal to challenge the open source community to achieve blob-free and free and open source WiFi and Bluetooth, see the Nutcracker Challenge.