STMicro has announced the EVLIOL4LSV1 IO-Link actuator board, an STM32G071CB Cortex-M0+ MCU-based reference design for commercial manufacturers with a built-in protocol stack and application software. Aimed at industrial beacons and home-appliance alarms, the EVLIOL4LSV1 combines the L6364Q dual-channel IO-Link transceiver (communications) and IPS4260L intelligent low-side power switch (for driving industrial loads). The EVLIOL4LSV1 IO-Link actuator board is powered by an STM32G071CB Arm-Cortex-M0+ microcontroller that hosts the proprietary stack and application software and communicates with the transceiver and low-side power switch. The evaluation board can be used to test the IPS4260 and L6364Q ICs. It features a 4-pin M12 connector for an IO-LINK master and a 5-pin SWD connector for programming. It can also directly interface with signaling systems, ranging from smart tower lights in factory automation to funnel alarms for quantity monitoring. The onboard transceiver is protected against electromagnetic interference and supports COM2 and COM3 speeds. It offers multiple modes [...]

The post STMicro releases IO-Link actuator board for industrial monitoring and home appliances appeared first on CNX Software - Embedded Systems News.

Raspberry Pi recently launched several AI products including the Raspberry Pi AI HAT+ for the Pi 5 with 13 TOPS or 26 TOPS of performance and the less powerful Raspberry Pi AI camera suitable for all Raspberry Pi SBC with a MIPI CSI connector. The company sent me samples of the AI HAT+ (26 TOPS) and the AI camera for review, as well as other accessories such as the Raspberry Pi Touch Display 2 and Raspberry Pi Bumper, so I’ll report my experience getting started mostly following the documentation for the AI HAT+ and AI camera. Hardware used for testing In this tutorial/review, I’ll use a Raspberry Pi 5 with the AI HAT+ and a Raspberry Pi Camera Module 3, while I’ll connect the AI camera to a Raspberry Pi 4. I also plan to use one of the boards with the new Touch Display 2. Let’s go through a [...]

The post Getting Started with Raspberry Pi AI HAT+ (26 TOPS) and Raspberry Pi AI camera appeared first on CNX Software - Embedded Systems News.

Last month we noted the Intel Processor N150, Processor N250, and Core i3-N355 Alder Lake-N Refresh CPUs were found in the upcoming ASUS NUC 14 Essential mini PC family, but availability was unclear. The Beelink EQ14 is the first Intel N150 mini PC which can be purchased today on either AliExpress (with EU plug) or Amazon for $182 and up for Black Friday and Cyber Monday 2024. Beelink calls the CPU family “Twin Lake” instead of “Alder Lake-N Refresh”, but we can’t confirm that since the N150 has not been officially launched yet and it’s not listed on Intel Ark. The computer is equipped with 16GB DDR4 memory, a 512GB NVMe SSD, two HDMI ports, two gigabit Ethernet ports, WiFi 6, etc… It also comes with a more unusual feature: a built-in AC power supply, something we previously saw in the Beelink EQ13 with an Intel N200/N100 CPU. Beelink EQ14 [...]

The post Beelink EQ14 mini PC features Intel N150 quad-core “Twin Lake” processor, built-in power supply appeared first on CNX Software - Embedded Systems News.

As expected, the Raspberry Pi Pico 2 W – the wireless version of the Raspberry Pi Pico 2 – is now available with an extra 2.4GHz WiFi 4 and Bluetooth 5.2 wireless module at an official price of $7. We’ll go through the specs and perform a mini review in this post trying out both WiFi and Bluetooth code samples. It’s not the first Raspberry Pi RP2350 with WiFi and Bluetooth we’ve seen, as Pimoroni introduced the Pico Plus 2 W board with an RP2350B MCU and Raspberry Pi RM2 Wi-Fi and Bluetooth module, and iLabs launched the Challenger+ RP2350 WiFi6/BLE5 board relying on ESP32-C6 wireless module. However, the Raspberry Pi Pico 2 W is the official board, is cheaper, and will certainly be the most popular/widely used. Raspberry Pi Pico 2 W specifications Raspberry Pi Pico 2 W specifications: SoC – Raspberry Pi RP2350 CPU Dual-core Arm Cortex-M33 @ [...]

The post $7 Raspberry Pi Pico 2 W board launched with 2.4 GHz WiFi 4 and Bluetooth 5.2 wireless module appeared first on CNX Software - Embedded Systems News.

The nRF54L15 DK is a development kit designed to evaluate the wireless SoCs of the nRF54L15, nRF54L10, and nRF54L05 wireless SoCs. These SoCs support multiple wireless protocols, including Bluetooth Low Energy, Bluetooth Mesh, Matter, Thread, Zigbee, and 2.4GHz proprietary protocols, with data rates of up to 4Mbps. The kit integrates the nRF54L15 SoC and provides emulation capabilities for the nRF54L10 and nRF54L05, enabling flexible testing and development across the nRF54L Series. The nRF54L series SoCs differ in memory configurations to meet various application requirements. The nRF54L15 includes 1.5 MB of non-volatile memory (NVM) and 256 KB of RAM for high-performance applications. The nRF54L10 features 1.0 MB of NVM and 192 KB of RAM for mid-range use cases, while the nRF54L05 offers 0.5 MB of NVM and 96 KB of RAM for entry-level designs requiring fewer resources. The kit is supported by the nRF Connect SDK and tools, providing access to [...]

The post nRF54L15 DK: A Development Kit for nRF54L15, nRF54L10, and nRF54L05 SoCs with Bluetooth, Thread, and Zigbee appeared first on CNX Software - Embedded Systems News.

Don’t miss this opportunity to upgrade your CNC experience with the Genmitsu 4040-PRO MAX CNC Router and the Genmitsu APP with WiFi Module—a powerful duo designed for precision, performance, and convenience. 4040-PRO MAX: Revolutionizing Precision and Performance The Genmitsu 4040-PRO MAX is engineered to deliver top-tier CNC routing with exceptional accuracy and power. Its 400 x 400mm working area and 710W spindle make it perfect for both intricate woodworking and demanding metal engraving tasks. Enhanced Stability & Rigidity: This router’s upgraded Z-axis and linear guide rail system ensure unmatched precision and reduce vibrations for consistent results. Increased Z-axis Clearance: A 100mm pass height accommodates larger materials, making it versatile for diverse projects. Powerful Spindle: The 710W spindle cuts effortlessly through tough materials, earning rave reviews from users for its reliability and efficiency. Comprehensive Compatibility: This router offers endless customization and is compatible with most 4040 accessories, including routers, four-axis modules, [...]

The post Take Your CNC Projects to the Next Level with the Genmitsu 4040-PRO MAX and Genmitsu APP (Sponsored) appeared first on CNX Software - Embedded Systems News.

SparkFun has released the Quadband GNSS RTK Breakout featuring the Quectel LG290P module designed for high-precision real-time kinematic (RTK) applications. It supports GPS, GLONASS, Galileo, BDS, QZSS, and NavIC constellations, with the ability to simultaneously receive signals from L1, L2, L5, and L6/E6 frequency bands. The module includes support for SBAS augmentation systems (e.g., WAAS, EGNOS, GAGAN) and PPP services (e.g., BDS PPP-B2b, QZSS CLAS), delivering reliable positioning with fast convergence times for precision navigation tasks. The breakout board offers a compact design (43.2 x 43.2mm) and multiple expansion options including 24 PTH pins, dual 4-pin JST Qwiic connectors, three UART interfaces, a USB-C connector, and additional PTH pins for BlueSMiRF/Serial-to-UART. With its RTK support and advanced GNSS capabilities, the board is ideal for applications requiring high-accuracy positioning and robust navigation performance. Previously, we covered several GNSS boards including the SparkFun GNSS L1/L5, u-blox EVK-LEXI-R10, and Conexio Stratus Pro and [...]

The post SparkFun introduces Quadband GNSS RTK Breakout board with Quectel LG290P module for high-precision navigation appeared first on CNX Software - Embedded Systems News.

In this off-topic post, I’m going to discuss some behind-the-scenes “fun” that may happen when managing the web server used to host the CNX Software website. From time to time, the server becomes unreachable, but I can still access its console, and notice a very high CPU load (over 100) on a VPS with four cores, while the CPU load is typically 0.5 to 2 under normal circumstances. That’s usually due to a DoS (denial of service), DDoS (distributed denial of service), or some bug I can’t identify. An easy way to solve this issue is to log in to Cloudflare and set the “Under Attack Mode” to on. It will show all visitors a JavaScript challenge the first time they visit the website, and the CPU usage typically drops back to normal level within a minute or so. That means I can access my website and so do regular [...]

The post Mitigating a DoS attack with GoAccess and Cloudflare appeared first on CNX Software - Embedded Systems News.

Waveshare has recently launched the RoArm-M2-S and RoArm-M2-Pro ESP32 robotic arms with four degrees of freedom, or 4-DOF for short. The main difference is that the RoArm-M2-S is equipped with standard servos, while the RoArm-M2-Pro features all-metal ST3235 bus servos, adding more durability and performance. Designed for educational and robotics applications, the 4-DOF RoArm-M2 is sturdy yet lightweight, built using carbon fiber and aluminum alloy. It can handle payloads up to 0.5kg and has a workspace diameter of 1 meter. The arm offers high precision with a 12-bit magnetic encoder and dual-drive technology for improved torque and stability. On top of that, it features a 12-bit magnetic encoder and dual-drive technology for improved torque and stability. Other features include a 360° omnidirectional base and support for both wireless (WiFi, ESP-NOW) and wired (USB) control. These features make this device suitable for various applications including industrial automation, education, research, and DIY robotics projects. Waveshare [...]

The post Waveshare RoArm-M2 ESP32 robotic arms offer four degrees of freedom, various servo options appeared first on CNX Software - Embedded Systems News.

Elephant Robotics Mercury X1 is a 1.2-meter high wheeled humanoid robot with two robotic arms using an NVIDIA Jetson Xavier NX as its main controller and ESP32 microcontrollers for motor control and suitable for research, education, service, entertainment, and remote operation. The robot offers 19 degrees of freedom, can lift payloads of up to 1kg, work up to 8 hours on a charge, and travel at up to 1.2m/s or about 4.3km/h. It’s based on the company’s Mercury B1 dual-arm robot and a high-performance mobile base. Mercury X1 specifications: Main controller – NVIDIA Jetson Xavier NX CPU – 6-core NVIDIA Carmel ARM v8.2 64-bit CPU with 6MB L2 + 4MB L3 caches GPU – 384-core NVIDIA Volta GPU with 48 Tensor Cores AI accelerators – 2x NVDLA deep learning accelerators delivering up to 21 TOPS at 15 Watts System Memory – 8 GB 128-bit LPDDR4x @ 51.2GB/s Storage – 16 [...]

The post Mercury X1 wheeled humanoid robot combines NVIDIA Jetson Xavier NX AI controller and ESP32 motor control boards appeared first on CNX Software - Embedded Systems News.

ASUSTOR Flashstor 6 Gen2 and Flashtor 6 Pro Gen2 are NAS systems based on AMD Ryzen Embedded V3C14 quad-core processor with up to two 10GbE RJ45 ports and taking up to 6 or 12 M.2 NVMe SSDs respectively. The Flashstor Gen2 models are updated to the ASUSTOR Flashtor NAS launched last year with similar specifications including 10GbE and up to 12 M.2 SSDs, but based on a relatively low-end Intel Celeron N5105 quad-core Jasper Lake processor. The new Gen2 NAS family features a more powerful AMD Ryzen Embedded V3C14 SoC, support for up to 64GB RAM with ECC, and USB4 ports. The downside is that it lacks video output, so it can’t be used for 4K/8K video consumption like its predecessor. Flashstor Gen2 NAS specifications: SoC – AMD Ryzen Embedded V3C14 quad-core/8-thread processor @ 2.3/3.8GHz; TDP: 15W System Memory Flashstor 6 Gen2 (FS6806X) – 8 GB DDR5-4800 Flashstor 12 Pro [...]

The post ASUSTOR Flashstor Gen2 NAS features AMD Ryzen Embedded V3C14, 10GbE networking, up to 12x NVMe SSD sockets appeared first on CNX Software - Embedded Systems News.

SoundSlide is an open-source hardware USB-C adapter that adds a capacitive touch interface to your laptop or keyboard PC in order to control the volume without having to reach out to the volume keys on the keyboard that may require Alt or Fn presses. SoundSlide is meant to be more intuitive than pressing keys and works without drivers with macOS, Windows, and Linux. At just 20.9 x 6.9 x 3.5 mm in size excluding the USB Type-C port, you can leave it connected to your laptop when you move around or put the laptop in your backpack. The SoundSlide relies on the touch interface from the Microchip SAM D11 Arm Cortex-M0+ microcontroller, and the company behind the project – Drake Labs – has made the firmware, schematics (PDF/WebP), and a command-line interface written on Go available on GitHub. You can check out how it works on a laptop in the [...]

The post SoundSlide capacitive touch USB-C adapter aims to ease volume control on laptops appeared first on CNX Software - Embedded Systems News.

MYiR Tech MYC-LR3576 is a system-on-module (SoM) based on Rockchip RK3576 octa-core Cortex-A72/A53 SoC with a 6 TOPS NPU and 8K video support suitable for AIOT applications that powers the MYD-LR3576 development board. The SoM supports up to 8GB of LPDDR4X RAM and 64GB of eMMC storage, along with a 32Kbit EEPROM. Connectivity options include dual Gigabit Ethernet ports, USB 3.2, and more. For multimedia, it supports HDMI, DisplayPort, eDP, MIPI-DSI, and MIPI CSI interfaces, and up to 8K video decoding/4K video encoding. The MYC-LR3576 also offers several audio I/O and multiple GPIO and I2C interfaces suitable for embedded systems. The MYD-LR3576 development board gives access to dual Gigabit Ethernet ports, Wi-Fi and Bluetooth support, HDMI, Mini DisplayPort, USB 3.0 ports, and GPIO headers. It also supports MIPI camera modules and a 10.1-inch LCD module and provides full access to the SoM’s features. Previously we have written about various development [...]

The post MYiR Tech MYC-LR3576 Rockchip RK3576 LGA SoM offers 6 TOPS NPU and 8K video support for AIoT applications appeared first on CNX Software - Embedded Systems News.

Starting with the GD32G553 SKUs, the 216 MHz GigaDevice GD32G5 high-performance Arm Cortex-M33 microcontroller family features 256KB to 512KB of embedded Flash with dual-bank Flash support, 128KB of SRAM, and a range of hardware accelerators including a DSP, single-precision FPU, a trigonometric function accelerator (TMU), and other hardware acceleration units, filter algorithms (FAC) and Fast Fourier Transform (FFT). Designed for industrial applications, the GD32G5 microcontrollers also offer a wide range of digital and analog interfaces and enhanced security capabilities suitable for digital power systems, charging stations, energy storage inverters, frequency converters, servo motors, and optical communication. GigaDevice GD32G5 specifications: MCU Core – Arm Cortex-M33 Armv8-M core clocked at up to 216MHz with DSP instruction set and single-precision FPU; up to 316 DMIPS, CoreMark score: 694. Memory/Storage 128KB SRAM (80KB SRAM0 + 16KB SRAM1 + 32KB TCMSRAM) 256KB to 512KB on-chip flash, QSPI interface for external storage External memory controller (EXMC) [...]

The post 216MHz GigaDevice GD32G5 Cortex-M33 MCU features analog interfaces and accelerators for industrial applications appeared first on CNX Software - Embedded Systems News.

The FWS-2370 is a network appliance powered by the Intel Atom C Series “Parker Ridge” or P Series “Snow Ridge” processor family (Atom C5315 by default), tailored for SD-WAN and uCPE applications. It incorporates Intel QAT and Intel VT-d/VT-x to accelerate encryption, decryption, and virtualization tasks. The system supports up to 64GB of DDR4 memory (ECC/Non-ECC) through dual SODIMM slots and offers onboard eMMC storage options up to 128 GB. Networking capabilities include four 2.5GbE RJ-45 ports (Intel I226-V), four gigabit Ethernet RJ-45 ports (Marvell 88E1543), and four 10GbE SFP+ ports, with optional PoE af/at support for enhanced deployment flexibility. For connectivity, the FWS-2370 features two M.2 B-Key slots for 5G/LTE modules, one M.2 E-Key slot for Wi-Fi, and two Mini Card slots with SIM support. This expansive configuration ensures seamless wired and wireless networking. Designed to manage high data throughput and multi-threaded workloads, the FWS-2370 is ideal for applications [...]

The post AAEON FWS-2370 network appliance features Intel Atom Parker Ridge/Snow Ridge processor, up to 14 Ethernet ports appeared first on CNX Software - Embedded Systems News.

Retrocomputing enthusiasts will be delighted to learn that a new ZX Spectrum replica is on the market: the ESP32 Rainbow. The single board computer swaps the Zilog Z80 for an ESP32-S3 microcontroller chip running an emulator, bringing the classic 80s computer back to life with a modern twist. It features a built-in color display, a microSD card slot for storage, a built-in touch keyboard in the ZX Spectrum style, and a USB Type-C port for power and data. The keyboard was recreated using full-color UV printing and is the most true-to-life component of the ESP32-S3-based ZX Spectrum single board computer. The touch keys won’t likely offer the best typing experience but that is reminiscent of the original ZX Spectrum. A lovely cherry on top is that the onboard USB-C port supports HID and the device can be used as a keyboard on another computer. The ZX Spectrum is one of [...]

The post ESP32 Rainbow is an open-source, ESP32-S3-powered ZX Spectrum single board computer (Crowdfunding) appeared first on CNX Software - Embedded Systems News.

SolidRun has recently introduced HummingBoard i.MX8M IIOT SBC and IIOT-200-8M Gateway built around the NXP i.MX 8M Plus Edge AI processor. Designed for IIoT and HMI applications the SBC hosts the NXP i.MX 8M Plus SOM which gives access to various connectivity options, including dual Gigabit Ethernet, Wi-Fi/Bluetooth, CAN-FD, RS232/RS485, and audio. Additionally, it has support for industrial protocols such as Modbus and MQTT, making it suitable for factory automation and smart energy projects. Based on the HummingBoard i.MX8M IIOT SBC, the IIOT-200-8M Gateway features a DIN-rail mountable design, which sacrifices some I/O interfaces to meet the demands of harsh deployment environments. Both products support Industrial temperature ranges, fanless construction, and compact dimensions, making them reliable choices for demanding applications like industrial automation, predictive maintenance, and remote monitoring. HummingBoard i.MX8M IIOT SBC Specifications SoC – NXP i.MX 8M Plus AI SoC CPU Quad-core Arm Cortex-A53 processor @ up to 1.6 GHz [...]

The post SolidRun unveils HummingBoard i.MX8M IIOT SBC and the IIOT-200-8M Gateway for Edge AI and industrial IoT applications appeared first on CNX Software - Embedded Systems News.

While Black Friday and Cyber Monday used to be a US-only event, it changed many years ago, and we’ve been writing about international Black Friday and Cyber Monday deals and coupon codes since 2014, since a large portion of our audience cannot benefit from promotions on Amazon’s Black Friday and Cyber Monday events that will take place from November 21 until December 2 this year. So I’ve gathered some international Black Friday and Cyber Monday 2024 deals and discount coupon codes from relevant manufacturers and popular online stores such as Aliexpress, Banggood, and others. Aliexpress Black Friday and Cyber Monday event Aliexpress’ Black Friday and Cyber Monday 2024 event has already started. There are three periods: Nov 19-21 PST – Warm Up event where users can find and add items to the cart before purchasing during the main event. Nov 22-30 PST – “On Sale” event with discounts up to [...]

The post Black Friday and Cyber Monday 2024 – International deals and coupons appeared first on CNX Software - Embedded Systems News.

Google releases a new Android version every year, and while the first Android 15 developer preview was released this year in February, the company has already announced the first Android 16 developer preview just a couple of months after the official release of Android 15 on AOSP in an “effort to drive faster innovation in apps and devices”. More specifically, Google plans to release two Android APIs next year: a major SDK release in Q2 2025 instead of Q3 followed by a minor SDK release in Q4 2025 that won’t include behavior changes that may require changes in apps, but only pick up feature updates, optimizations, and bug fixes. The change was mostly made to better accommodate the device launch schedule of smartphone manufacturers. That almost means many more changes are expected between the preview and the beta release. As of now, Google has only announced a few new features [...]

The post The first Android 16 developer preview is out (much) earlier than expected appeared first on CNX Software - Embedded Systems News.

PCBWay, founded in 2013, is a global electronics manufacturing services company driven by customer value. With 5 factories in Shenzhen China (2 offering PCB services, 2 offering PCBA services, and 1 offering CNC machining, sheet metal, and injection molding services), we are able to leverage advanced electronics technology, component resources, experienced technicians, and more. We also work with a number of manufacturers in Shenzhen and other cities to support products beyond our own capabilities. PCBWay has a long history of providing manufacturing support and design advice based on our customers’ products, and we continue to provide our customers with printed circuit boards, components, PCB assembly, molding services, electronic assemblies, contract manufacturing, etc. from design to mass production. Today, multiple technology trends are driving PCB adoption. The Internet of Things (IoT) and Artificial Intelligence (AI), combined with the development of 5G systems, have opened up a whole new level of connectivity [...]

The post PCBWay: Your One-Stop Shop for Electronics Manufacturing from Design to Production (Sponsored) appeared first on CNX Software - Embedded Systems News.