It’s already day 6 of CNX Software’s Giveaway Week 2024, and the prize is the Elecrow 7-inch CrowVision touchscreen display designed for Raspberry Pi boards and other single board computers (SBC). Elecrow sent us a sample of the touchscreen display last year to review “whenever we have time”. But it turns out that finding time is tricky, so instead of getting it to waste, I decided to give it away to one lucky reader of CNX Software. Elecrow CrowVision 7-inch display specifications: Type – 7-inch IPS display Resolution – 1024×600 Multitouch – 5-point capacitive touchscreen Viewing angle – 178° Video Input – Mini HDMI connector USB – Micro USB port for touchscreen function Audio 3.5mm audio jack for headphones Speaker connector User input – Touchscreen and keypad interface for provided 5-key board Power Supply 12V/2A DC input via power barrel jack 5V DC output via USB Type-A port Dimensions – [...]

The post Giveaway Week 2024 – Elecrow 7-inch CrowVision touchscreen display for Raspberry Pi and other SBCs appeared first on CNX Software - Embedded Systems News.

Waveshare ESP32-P4-NANO is the first third-party ESP32-P4 RISC-V board we’ve seen and it follows the launch of the Espressif Systems’ ESP32-P4-Function-EV-Board devkit introduced this summer. While the ESP32-P4 is a general-purpose microcontroller, the ESP32-P4-NANO board still implements wireless connectivity through an ESP32-C6 WiFI 6 and Bluetooth LE 5.4 module and offers a range of interfaces such as an Ethernet RJ45 port with optional PoE, MIPI DSI and CSI interfaces, a USB Type-A OTG port, and GPIO headers for expansion. ESP32-P4-NANO specifications: Microcontroller – ESP32-P4NRW32 MCU Dual-core RISC-V microcontroller @ 400 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz GPU – 2D Pixel Processing Accelerator (PPA) VPU – H.264 and JPEG codecs support Memory – 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM, 32MB PSRAM Storage – 128 KB HP ROM, 16 KB LP ROM Wireless module – [...]

The post Waveshare ESP32-P4-NANO board offers Ethernet, WiFi 6, Bluetooth 5, MIPI display and camera interfaces, GPIO headers appeared first on CNX Software - Embedded Systems News.

Raspberry Pi has launched the Touch Display 2, a 7-inch touchscreen RGB TFT display with 1280×720 designed to be connected to Raspberry Pi single board computers. It improves on the original Raspberry Pi Touch Display with a higher resolution (1280×720 vs 800×480) and a slimmer form factor thanks to the integration of the display driver PCB into the display enclosure itself. Raspberry Pi Touch Display 2 specifications Display Type – 7-inch 24-bit RGB TFT display Resolution 1280 x 720 resolution Touch panel – 5-point multi-touch capacitive touch panel Active area – 155 x 88 mm Backlight type – LED B/L Surface treatment – anti-glare Host interface – MIPI CSI connector with ribbon cable compatible with all Raspberry Pi boards except the Raspberry Pi Zero line Power Supply – 5V DC via 2-wire, 3-pin connected inserted into the 40-pin GPIO header Dimensions – 189.32 x 120.24mm The back of the display [...]

The post Raspberry Pi Touch Display 2 with 1280×720 resolution, thinner design launched for $60 appeared first on CNX Software - Embedded Systems News.

DFRobot’s 14-inch ultra-wide IPS display offers narrow bezels, 4K (3840 x 1100) resolution, 10-point capacitive touch, and is designed for mounting single board computers such as LattePanda Sigma and Raspberry Pi 5. It can also be connected to other computers with dual USB Type-C and mini HDMI video input interfaces. With a unique 3.5:1 bar-shaped aspect ratio, this display can present information in an intuitive format for countertop advertising screens, measurement equipment, and smart terminals. DFRobot’s “14-inch 4K IPS bar touch display” specifications Display 14-inch ultra-wide, narrow bezel IPS bar touch display with 4K (3840×1100) resolution Ten-point capacitive touch support, offering precise input Aspect ratio – 3.5:1 Pixel – 0.08964(H) × 0.08964(V) mm Viewable area – 344.2(H)×98.6(V) mm with 170° viewing angle and ≥6H surface hardness Color Gamut – 72% Brightness – 300 cd/m2 Contrast Ratio – 1200:1 Refresh rate – 60Hz Transmittance – Greater than equals to 86% Driver [...]

The post 14-Inch 4K ultra-wide touch display is optimized for Raspberry Pi and LattePanda boards, features USB Type-C and HDMI interfaces appeared first on CNX Software - Embedded Systems News.

The Renesas RX260 and RX261 two new 64 MHz microcontrollers part of the high-performance, high-efficiency RX product family with integrated capacitive touch-sensing and high power efficiency in both active and standby modes. The microcontrollers are based on the RXv3 core with a performance score of 355 CoreMark @ 64MHz, which is “2.5 times higher than competing 64 MHz class MCUs.” The chips are also power-efficient, with a consumption rate of 69μA/MHz during active operation and 1μA only in standby mode. According to Renesas, the chips are up to 25% more efficient in active mode and 87% more efficient in standby mode than other 64 MHz class MCUs. Another competing factor is the onboard 8KB of data flash, eliminating the need for external EEPROM. The RX260 and RX261 Group MCUs support noise- and water-resistant capacitive touch via Renesas’ third-generation capacitive touch IP (CTSU2SL). They also integrate an “automatic judgment function” that [...]

The post Renesas RX260 and RX261 64 MHz RXv3 MCUs target power-efficient touch applications appeared first on CNX Software - Embedded Systems News.

Waveshare has launched an ESP32-S3 1.91-inch AMOLED development board with a 6-axis motion sensor designed for the rapid prototyping of IoT and portable projects with interactive displays. The board is built around the ESP32-S3R8 chip, featuring a 32-bit LX7 dual-core processor running at up to 240MHz, with integrated 2.4GHz Wi-Fi and Bluetooth BLE 5. It also includes 16MB Flash, 8MB PSRAM, 512KB SRAM, and 384KB ROM for efficient processing and memory management. At the core of its display capabilities is a 1.91-inch AMOLED screen with a 240×536 resolution, supporting 16.7 million colors. Powered by the RM67162 controller and connected via the QSPI interface, the display is ideal for running GUI applications like LVGL. The board is available in both touch and non-touch versions, with the touch-enabled models using the FT3168 touch IC. Other features include a QMI8658 6-axis IMU, a microSD card slot, and a Lithium battery header. The ESP32-S3 [...]

The post ESP32-S3 board features 1.91-inch AMOLED display and QMI8658 6-axis motion sensor appeared first on CNX Software - Embedded Systems News.