MediaTek is advancing its IoT Edge AI capabilities by expanding upstream support for its Genio platforms. Building on the success of the MediaTek Kompanio Chromebook project, this new initiative brings the focus to MediaTek’s Genio Evaluation Kits, which are being integrated into Collabora’s Linux development ecosystem. Collabora’s support for MediaTek Chromebooks over the last four […]

Pimoroni’s new Clipper HAT Mini brings 4G LTE connectivity to the Raspberry Pi, enabling projects to operate where Wi-Fi is limited or unavailable. Designed for remote applications, it supports reliable data transmission for outdoor sensors, mobile setups, and monitoring systems. The Clipper HAT Mini integrates a SIMCom A7683E 4G LTE module, supporting LTE Cat 1 […]

System76 Meerkat MiniPC with 13th Gen Intel Processors and M.2 2280 Slot

Variscite has introduced the DART-MX91 System on Module, a compact and cost-effective solution within the DART Pin2Pin family, targeting edge devices for IoT, smart cities, industrial applications, and more. Powered by a 1.4 GHz Cortex-A55 NXP i.MX 91 processor, the DART-MX91 supports up to 2GB of LPDDR4 memory and offers eMMC storage options ranging from […]

The EMP-100 is a compact, fanless mini PC built for versatile applications, including digital signage, industrial control, and retail environments. Designed with an aluminum chassis and VESA mounting support, it provides silent performance, dual 4K display support, and storage expansion via an M.2 2280 slot. The EMP-100 series offers a choice between Intel Celeron processors, […]

The Radxa X4L, also known as the Palmshell SLiM X4L, is a compact device powered by Intel’s quad-core N100 processor. With features like a 2.5GbE LAN port, Wi-Fi 6E, and dual 4K@30Hz display support, it’s well-suited for multimedia and general-purpose use. Unlike the Palmshell SLiM X2L released this year, the X4L integrates the Intel Alder […]

Radxa recently introduced a compact networking device powered by the hexacore Rockchip RK3582 System-on-Chip. This new model builds on the design of the previous Radxa E20C but features dual 2.5GbE RJ45 ports, enhancing its networking capabilities. The Radxa E52C is built on the Rockchip RK3582 SoC, which includes a 6-core CPU composed of a dual-core […]

Olimex Showcases Develoment Board Design Based on ESP32-P4 RISC-V SoC

The Raspberry Pi community has launched two new accessories to enhance their single-board computers: the $12 USB 3 Hub, providing four-way USB 3.0 connectivity, and the $60 Touch Display 2, offering a higher-resolution, slimmer touch interface for interactive use. The USB 3 Hub provides high-speed data transfer up to 5 Gbps across four downstream USB […]

(Updated) Banana Pi Showcases BPI-CanMV-K230D Zero with Canaan K230D Chip Design

SolidRun HummingBoard i.MX8M IIOT SBC with NVMe, RS232, RS485, and LTE Support

Forlinx Embedded has introduced the FET-MX95xx-C System on Module, built around the high-performance NXP i.MX95xx processor for industrial, automotive, and IoT applications. Key features include a 10GbE port, dual GbE ports, CAN interfaces, camera support, and multiple wireless protocols. Unlike the FET3562J-C SoM, this new Forlinx device is powered by the NXP i.MX95xx processor. It […]

The T-Display S3 AMOLED Plus is an upgraded development board based on the ESP32-S3 microcontroller with a dual-core LX7 processor. It features a 1.91″ AMOLED display with a 240×536 resolution, using RM67162 IPS AMOLED technology for sharp colors and full viewing angles with QSPI interface support. Similar to the LILYGO T4 S3 launched last year, […]

MYC LR3576 SoM with Octa-Core RK3576 for Embedded Applications

WIZnet has revealed two new microcontroller evaluation boards, the W5500-EVB-Pico2 and W5100S-EVB-Pico2. These boards are based on the Raspberry Pi RP2350 microcontroller and are equipped with fully hardwired TCP/IP controllers, enhancing their networking capabilities. The W5500-EVB-Pico2 features the W5500 Ethernet Controller, which supports eight independent hardware sockets. This allows for handling multiple network connections simultaneously. […]

Engicam has showcased a single-board computer based on the RockChip RK3568 series, targeting a range of embedded and industrial applications. This high-performance board offers dual Gigabit Ethernet ports, including one with PoE+ support, as well as an HDMI port capable of up to 4K resolution at 60Hz. Powered by the RockChip RK3568 or RK3568J CPU, […]

Luckfox Omni3576 Board with Rockchip RK3576 Running Debian 12

M5Stack has launched the M5Stack LLM Module, an advanced offline large language model inference module designed for terminal devices requiring efficient, cloud-independent AI processing. This product is described as targeting offline applications such as smart homes, voice assistants, and industrial control. The AX630C SoC appears to include dual-core Arm A53 processors clocked at 1.2GHz, along […]

CrowdSupply recently launched the USB Insight Hub, a tool designed to provide detailed monitoring and control over multiple USB devices. Built for developers and tech enthusiasts, this hub offers a range of monitoring features, allowing users to view power and data usage in depth. The hub features a Renesas uPD720210 USB 3.0 controller, supporting both […]

The Tinker Board 3 is a compact, fanless single-board computer powered by the Rockchip RK3566 SoC, designed for embedded and IoT applications that require multi-display capabilities, wireless connectivity, or Gigabit Ethernet support. This board integrates a quad-core Arm Cortex-A55 processor with a 64-bit Arm v8 architecture. It comes with either 2GB or 4GB LPDDR4X memory […]