❌

Normal view

There are new articles available, click to refresh the page.
Before yesterdayMain stream

SenseCAP T1000-E for Meshtastic Update: FAQs, and Debugging Tips

✇Seeed
By: Zero Zhang
31 October 2024 at 13:23

Hi Community,

First, we want to extend a heartfelt thanks to each of you for your interest and support for the SenseCAP T1000-E. Since its release, we’ve been thrilled to see it being widely adopted within the Meshtastic community, helping enthusiasts like you enhance your connectivity projects. Your feedback has been invaluable to us, highlighting what you love about the device and where we can make it even better.

FAQs and Debugging Tips

We’ve received a lot of insightful feedback from the community, and our team is actively investigating each single of them. We are committed to ensuring that your experience with the T1000-E is smooth and reliable.

To support you further, we’ve compiled a few common FAQs and tips:

1. Accidentally updated the wrong firmware

Before you update the firmware, please check the firmware file carefully and DO NOT FLASH ANY FIRMWARE OTHER THAN T1000-E FIRMWARE, this may cause unexpected errors.

– Solution:

If you accidentally update the wrong firmware, please flash the bootloader first, and then flash the application firmware.

2. Device bricked

a. The device can still enter the DFU mode

– Solution:

Flash the bootloader first, and then flash the application firmware.

b. The device can not enter the DFU mode, but you can see the serial port of your device

– Solution:

Using a serial tool, set the baud rate to 1200, and then click connect, try this process multiple times until the green light of the device is solid, once the device is restored to DFU mode, you can follow a. solution then.

3. Battery drop issue

Following our battery discharge test, we found that the T1000-E battery performs as expected. We’re enhancing the battery discharge curve report to provide users with a clearer and more accurate performance overview.

For more details, please check the T1000-E wiki, if your issues still cannot be solved, feel free to contact our tech support team at sensecap[at]seeed.cc !

Last but Not Least: New Meshtastic-Compatible Products

A 4-inch touch screen driven by ESP32-S3 and RP2040 Dual-MCUs. With the compatibility with Meshtastic, SenseCAP Indicator can be another game changer as your Meshtastic phone or you name it. 🙂

A mini size LoRa Dev Kit with XIAO ESP32S3 and Wio-SX1262 LoRa module, with pre-flashed Meshtastic firmware, it’s ready for you to embark your journey with Meshtastic once it’s powered on.

– Get Started with XIAO ESP32 for Meshtastic

We’re Here for You

We are truly grateful for your dedication to improving the T1000-E. Your feedback has allowed us to make adjustments that benefit the entire Meshtastic community. If you have any further questions, suggestions, or ideas, don’t hesitate to share your insights with us on our discord.

Thank you once again for being part of the journey with us. Let’s keep pushing the boundaries of what’s possible together!

The post SenseCAP T1000-E for Meshtastic Update: FAQs, and Debugging Tips appeared first on Latest Open Tech From Seeed.

AIoT Xperience Day in Düsseldorf: Unlock the Power of AI and IoT

✇Seeed
By: Kezang Loday
23 September 2024 at 19:09

Hey community! We’re excited to invite you to join us at the AIoT Xperience Day in Düsseldorf, an event co-organized by Techbros, Uplink, Heliotics, Infinetics and Seeed Studio. 

This is an event you should not miss. Either join the hands-on workshops, play with live demos, show your projects or talk with like-minded enthusiasts, innovators, and professionals in the fields of AI and IoT, it is ensured to be a half-day full of excitement!

Hands-on Workshops

During the event, you’ll get the opportunity to explore two exciting workshops:

1. Meshtastic Workshop

Learn how to set up and utilize Meshtastic, a decentralized LoRa mesh network, with the SenseCAP T1000-E Tracker. Whether you’re a beginner or an experienced developer, this session will demonstrate how you can build a free, off-grid communication network to transmit messages without relying on traditional infrastructure.

2. No-Code AI with XIAO ESP32S3 Sense

Can AI be added to almost anything? Yes, and without any coding! In this hands-on workshop, you’ll discover how to easily build your own AI Vision sensor using XIAO ESP32S3 Sense and SenseCraft AI, our no-code platform for training and deploying AI models. With just a few steps, you’ll have your own custom AI Vision sensor up and running. For this workshop participants need to bring their own laptop.

Why Attend?

This event is more than just workshops. You’ll also get to play with live demos of cutting-edge AIoT technology and connect with others who are passionate about the future of AI and IoT.  Don’t miss the “show and tell” session, where participants will have the chance to share their own innovative projects. And you are invited to bring your projects to the spotlight as well!

Whether you’re interested in creating decentralized communication networks, or you want to see how AI can be seamlessly integrated into your projects without a single line of code, this is the event for you.

Event Details

Time: September 27, 2024  2:00 PM – 6:00PM

Venue: Techbros Office, Heerdter Lohweg 212, 40549 Düsseldorf, Germany

Food and drinks will be prepared according to sign-ups, and the spots are limited. Do sign up now to secure your spot! See you in Düsseldorf!

The post AIoT Xperience Day in Düsseldorf: Unlock the Power of AI and IoT appeared first on Latest Open Tech From Seeed.

❌
❌