❌

Normal view

There are new articles available, click to refresh the page.
Before yesterdayMain stream

GEEKOM Mini Air12 Lite review – A low-cost Intel Processor N100 mini PC tested with Windows 11 Pro

17 November 2024 at 16:15
GEEKOM Mini Air12 Lite mini PC review windows 11

We’ve already checked the hardware of the GEEKOM Mini Air12 Lite mini PC with an unboxing and teardown in the first part of the review. It is a low-cost mini PC based on an Intel Processor N100 CPU, coupled with 8GB DDR4-3200 memory, a 256GB M.2 SATA SSD, dual Display output through HDMI and DisplayPort connector, GbE, WiFi 6E, and a 9-pin expansion header port – as found in some NUC model – to access an external power button, reset button, and LEDs when housed in a cabinet or kiosk. You’ll find the full Mini Air 12 Lite specifications in our previous article about it. We’ve now had more time to test the mini PC, so we’ll report our experience with the Mini Air12 Lite running Windows 11 Pro operating system in the second part of the review. We’ll go through a software overview, test most of the features, run [...]

The post GEEKOM Mini Air12 Lite review – A low-cost Intel Processor N100 mini PC tested with Windows 11 Pro appeared first on CNX Software - Embedded Systems News.

GEEKOM GT1 Mega Review – Part 2: An Intel Core 9 Ultra 185H Meteor Lake β€œAI” mini PC tested with Windows 11 Pro

12 November 2024 at 14:00
GEEKOM GT1 Mega Windows 11 Pro Review

I’ve already gone through the specifications, an unboxing, and a teardown of the GEEKOM GT1 Mega AI mini PC powered by an Intel Core Ultra 9 185H β€œMeteor Lake” processor with 32GB DDR5 RAM and a 2TB M.2 NVMe SSD in the first part of the review. I’ve now had more time to play with the GEEKOM GT1 Mega, so I will report my experience with Windows 11 Pro operating system in the second part of the review testing features, running benchmarks including an AI benchmark, evaluating networking and storage performance, testing the thermal design while under stress, and taking measurements for fan noise and power consumption. Software overview and features testing Going to the System->About window in the Settings confirms we have a GT1-Mega mini PC powered by a 2.50 GHz (base frequency) Intel Core Ultra 9 185H processor with 32GB of RAM running Windows 11 Pro 23H2 build [...]

The post GEEKOM GT1 Mega Review – Part 2: An Intel Core 9 Ultra 185H Meteor Lake β€œAI” mini PC tested with Windows 11 Pro appeared first on CNX Software - Embedded Systems News.

Maxtang T0-FP750 review – Part 3: An AMD Ryzen 7 8845HS mini PC tested with Ubuntu 24.04

9 November 2024 at 21:09
Maxtang T0-FP750 mini PC Ubuntu 24.04 review

We’ve already checked out the hardware of the Maxtang T0-FP750 mini PC with an unboxing and a teardown in the first part of the review, before thoroughly testing the AMD Ryzen 7 8845HS mini PC in Windows 11 Pro. The time has now come to report our experience with Ubuntu 24.04, and more exactly Ubuntu 24.04.1 β€œdot” release, with the Maxtang T0-FT750 mini PC in the final part of the review. This will include a software overview, feature tests, benchmarks, storage and USB performance evaluation, 2.5Gbps Ethernet and WiFi 6 network performance tests, a stress test to check for thermal and/or power throttling, and fan noise and power consumption measurements. We will also compare the results of the Maxtang T0-FP750 mini PC in Ubuntu 24.04 against the ones for the earlier Maxtang MTN-FP750 mini PC using AMD Ryzen 7 7735HS CPU which we tested with Ubuntu 22.04. Ubuntu 24.04 system [...]

The post Maxtang T0-FP750 review – Part 3: An AMD Ryzen 7 8845HS mini PC tested with Ubuntu 24.04 appeared first on CNX Software - Embedded Systems News.

BeagleY-AI SBC review with Debian 12, TensorFlow Lite, other AI demos

13 October 2024 at 11:29
BeagleY-AI review

Today I’ll be reviewing the BeagleY-AI open-source single-board computer (SBC) developed by BeagleBoard.org for artificial intelligence applications. It is powered by a Texas Instruments AM67A quad-core Cortex-A53 processor running at 1.4 GHz along with an ARM Cortex-R5F processor running at 800 MHz for handling general tasks and low-latency I/O operations. The SoC is also equipped with two C7x DSP units and a Matrix Multiply Accelerator (MMA) to enhance AI performance and accelerate deep learning tasks. Each C7x DSP delivers 2 TOPS, offering a total of up to 4 TOPS. Additionally, it includes an Imagination BXS-4-64 graphics accelerator that provides 50 GFlops of performance for multimedia tasks such as video encoding and decoding. For more information, refer to our previous article on CNX Software or visit the manufacturer’s website. BeagleY-AI unboxing The BeagleY-AI board was shipped from India in a glossy-coated, printed corrugated cardboard box. Inside, the board is protected by [...]

The post BeagleY-AI SBC review with Debian 12, TensorFlow Lite, other AI demos appeared first on CNX Software - Embedded Systems News.

Radxa X4 review – An Intel N100 alternative to Raspberry Pi 5 tested with Ubuntu 24.04

29 September 2024 at 10:34
Radxa X4 Ubuntu 24.04 review

We already looked at the Radxa X4 kit featuring an Intel N100 SBC with a design similar to the Raspberry Pi 5 and accessories including a Radxa Power PD 30W power adapter, an NVMe SSD, and a USB-C to USB-C cable, in the first part of the review, before installing Ubuntu 24.04 on the board.

In the second part of the review, we will test Ubuntu 24.04 in more detail with some benchmarks and power consumption measurements to show how well it works (or not) compared to a Raspberry Pi 5. We will also test the 40-pin GPIO header on the Radxa X4 controlled through a Raspberry Pi RP2040 microcontroller.

The post Radxa X4 review – An Intel N100 alternative to Raspberry Pi 5 tested with Ubuntu 24.04 appeared first on CNX Software - Embedded Systems News.

❌
❌