❌

Normal view

There are new articles available, click to refresh the page.
Before yesterdayMain stream

FlexiPi is a bendable Raspberry Pi Pico clone made of flexible PCB (Crowdfunding)

26 October 2024 at 09:00
Flexible Raspberry Pi Pico

FlexiPi is a bendable Raspberry Pi RP2040 board made of flexible PCB with the same layout as the original Raspberry Pi Pico, but featuring a USB-C port instead of a micro USB port on the official board. This follows the Flexduino flex PCB clone of the Arduino UNO made by β€œEDISON SCIENCE CORNER”, but the smaller design of β€œTOP Gadgets” FlexiPi may make it potentially more useful since it could be inserted into tight or round enclosures. FlexiPi specifications: MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller @ 48 MHz (overclockable to 133 MHz) with 264KB SRAM Storage – 2MB QSPI flash USB – 1x USB Type-C 1.1 port used for power and programming Expansion 2x 20-pin 2.54mm pitch header and castellated holes with 26 GPIOs, 3x 12-bit ADC up to 500 Kbps, 2x UART, 2x I2C, 2x SPI, 16x PWM, 2x programmable high-speed I/O 3.3V I/O voltage Sensor – [...]

The post FlexiPi is a bendable Raspberry Pi Pico clone made of flexible PCB (Crowdfunding) appeared first on CNX Software - Embedded Systems News.

Challenger+ RP2350 WiFi6/BLE5 IPEX3 with CircuitPython Compatibility

12 October 2024 at 20:33
The Challenger+ RP2350 Wi-Fi6/BLE5 IPEX3 development board showcases the dual-core Cortex-M33/RISCV RP2350 microcontroller from Raspberry Pi. With 8MB of Flash and RAM, it’s optimized for developers creating embedded solutions that demand high-performance memory and wireless capabilities. A key component of the board is the ESP32-C6 module, enabling Wi-Fi6 and Bluetooth 5.3 connectivity. This module supports […]

Pimoroni Pico Plus 2 W combines RP2350B MCU with Raspberry Pi RM2 Wi-Fi and Bluetooth module

5 October 2024 at 15:11
Pimoroni Pico Plus 2 W

Raspberry Pi released the Raspberry Pi Pico 2 a few months ago, featuring the new RP2350 chip. Despite several upgrades, it lacks wireless connectivity like Pico W. While there’s no official Raspberry Pi Pico 2 W yet, Pimoroni has developed an unofficial alternative, the Pimoroni Pico Plus 2 W, which integrates Wi-Fi and Bluetooth using a yet-to-be-formally-announced Raspberry Pi RM2 module and potentially set to appear in a future Pico 2W. The Pimoroni Pico Plus 2W board is powered by the Raspberry Pi RP2350B dual-core Arm Cortex-M33 microcontroller, features 16MB of QSPI flash with XiP support, 8MB of PSRAM, wireless connectivity, a USB Type-C port for power and data, and a Qwiic/STEMMA QT connector for breakout board integration. A few days ago, we covered the Pimoroni Explorer board, an electronic prototyping board built around the Raspberry Pi RP2350B chip. It features a 2.8-inch LCD screen, a speaker connector, and multiple [...]

The post Pimoroni Pico Plus 2 W combines RP2350B MCU with Raspberry Pi RM2 Wi-Fi and Bluetooth module appeared first on CNX Software - Embedded Systems News.

Adafruit Feather RP2350 board with HSTX port enables video output and display interfaces

24 September 2024 at 12:30
Adafruit Feather RP2350 with HSTX Port

β€œAdafruit Feather RP2350 with HSTX port” is a Raspberry Pi RP2350 MCU development board that features an onboard 22-pin high-speed serial transmit interface (HSTX) port. The board also features a built-in 200mA+ LiPo charger, an RGB LED, a STEMMA QT connector, and a USB Type-C port for power and programming. The board is compatible with FeatherWings and supports development with various programming languages. These features make this board suitable for a wide range of applications, from embedded projects and IoT devices to educational purposes and prototyping. Previously we have covered a variety of RP2350-powered development boards, including the MOTION 2350 Pro, designed for robotics and motor control; the Solder Party’s RP2350 Stamp, ideal for space-constrained applications; and the WIZnet Raspberry Pi RP2350 boards designed for IoT and internet-connected applications. Feel free to check those out if you want to take a look at some of the unique development boards. Adafruit [...]

The post Adafruit Feather RP2350 board with HSTX port enables video output and display interfaces appeared first on CNX Software - Embedded Systems News.

Low-cost Makerdiary board with iMX RT1011 Crossover MCU and Zephyr Support

22 September 2024 at 07:55
Makerdiary recently introduced the iMX RT1011 Nano Kit, a compact, high-performance development board featuring NXP’s iMX RT1011 Crossover MCU. With an Arm Cortex-M7 core running at up to 500 MHz, it delivers strong CPU performance and real-time responsiveness The iMX RT1011 Nano Kit includes 128 KB of on-chip RAM, configurable as Tightly Coupled Memory or […]
❌
❌