โŒ

Normal view

There are new articles available, click to refresh the page.
Before yesterdayMain stream

Giveaway Week 2024 โ€“ RAKwireless Blues.ONE LoRaWAN, LTE-M, and NB-IoT devkit

6 November 2024 at 10:00
Blues.ONE LTE-M NB-IoT devkit

For the fourth year in a row, RAKwireless is participating in CNX Softwareโ€™s Giveaway Week, and this year, the company is offering the Blues.ONE IoT development kit with LoRaWAN, LTE-M, and NB-IoT connectivity and 500MB of cellular data through the Blues NoteCard. The devkit can be used to prototype or develop IoT devices for industrial automation and asset-tracking applications and relies on the WisBlock modular IoT prototyping system with the RAK13102 WisBlock Blues Notecarrier, the Blues NoteCard, a WisBlock Base Board, and a WisBlock Core module. Blues.ONE kit content: RAK4631 WisBlock Core Module based on Nordic Semi nRF52840 Arm Cortex-M4F microcontroller @ 64 MHz with 1 MB Flash, 256 KB RAM, Bluetooth Low Energy 5.0 protocol stack Semtech SX1262 LoRa Transceiver with LoRaWAN 1.0.2 protocol stack RAK19007 WisBlock Base Board with 4x sensor slots, 1x IO slot, a USB Type-C port, a rechargeable battery connector, and a solar panel connector [...]

The post Giveaway Week 2024 โ€“ RAKwireless Blues.ONE LoRaWAN, LTE-M, and NB-IoT devkit appeared first on CNX Software - Embedded Systems News.

Spectra is a customizable, JavaScript ESP32-S3 and nRF52832 smartwatch (Crowdfunding)

18 October 2024 at 19:21
spectra smartwatch

Spectra is a JavaScript-based hackable smartwatch based on the ESP32-S3 WiFi and Bluetooth microcontroller that aims to offer the quality of high-end consumer smartwatches with the repairability of a maker-targeted device. The Spectra smartwatch combines the ESP32-S3 microcontroller with a Nordic Semi nRF52832 co-processor to optimize the battery life. The ESP32-S3 is maxed out with 8MB of RAM and 32MB of external flash memory, and the microSD card slot in the watch supports up to a 512GB memory card. It shares a similar concept with the Bangle.js and the Bangle.js 2 customizable smartwatches. According to the maker, Spectra is not bound to be fully open-source, since the project uses โ€œexternal proprietary code [they] arenโ€™t allowed to share.โ€ They plan to publish Arduino libraries and hardware design files, but there is no live GitHub repository yet. Other hackable smartwatches include the TinyWatch S3, the ZSWatch, and the Sensor Watch Pro. Spectra [...]

The post Spectra is a customizable, JavaScript ESP32-S3 and nRF52832 smartwatch (Crowdfunding) appeared first on CNX Software - Embedded Systems News.

KAGA FEI ES4L15BA1 is an ultra-small Bluetooth LE 6.0 and 802.15.4 module based on Nordic nRF54L15 SoC

18 October 2024 at 09:01
ultra small Bluetooth 6.0 module

Japanese company KAGA FEI has recently unveiled the incredibly small ES5L15BA1 Bluetooth LE 6.0 and 802.15.4 module based on Nordic Semi nRF54L15 ultra-low-power Cortex-M33 wireless MCU. We had previously covered the u-Blox NORA-B2 which I already found pretty small at 14.3 x 10.4 x 1.9mm, but the ES5L15BA1 module goes a step further measuring just 8.55 x 3.25 x 1.00 mm with an integrated antenna which could make it the worldโ€™s smallest Bluetooth LE module. KAGA FEI ES4L15BA1 specifications: SoC โ€“ Nordic Semiconductor nRF54L15 MCU cores Arm Cortex-M33 with Arm TrustZone @ 128MHz RISC-V coprocessor for software-defined peripheral Memory โ€“ 256KB SRAM Storage โ€“ 1.5MB non-volatile memory Wireless Bluetooth 6.0 Data rates โ€“ 2Mbps, 1Mbps, 500kbps, 125kbps Features AoA / AoD Channel Sounding 802.15.4 radio for Thread / Zigbee / Matter Nordic Proprietary 2.4 GHz protocol up to 4 Mbps Frequency โ€“ 2402 to 2480 MHz +8dBm output power Antenna [...]

The post KAGA FEI ES4L15BA1 is an ultra-small Bluetooth LE 6.0 and 802.15.4 module based on Nordic nRF54L15 SoC appeared first on CNX Software - Embedded Systems News.

LumenRadioโ€™s nRF52840 based Wireless Modbus module aims to simplify Modbus RTU installations

15 October 2024 at 07:00
LumenRadio's W Modbus and W Modbus PRO module's

LumenRadio has recently introduced a Wireless Modbus (W-Modbus) module built around Nordic Semiconductorโ€™s nRF52840 SoC. The module can connect up to 100 nodes, integrates a power amplifier with 100mW transmission power, and supports Bluetooth LE for smartphone connectivity. These features simplify Modbus RTU installations by eliminating traditional control cables, making them ideal for building and industrial automation applications. The company mentions two variants available for this module the โ€˜W-Modbus OEM Moduleโ€™ which supports one Modbus client, and the โ€˜W-Modbus PRO OEM Moduleโ€™ supporting up to sixteen Modbus clients. Both modules support self-healing, self-organizing mesh protocols that address the issues of network reliability and scalability in industrial environments. The module can also be used for remote monitoring and troubleshooting via smartphones. LumenRadioโ€™s Wireless Modbus module specification Module โ€“ LumenRadio W-Modbus module SoC โ€“ย ย Nordic Semiconductor nRF52840 CPU โ€“ 32-bit Cortex-M4 core with FPU @ 64 MHz Connectivity Bluetooth 5.4ย  (BLE, Bluetooth mesh, [...]

The post LumenRadioโ€™s nRF52840 based Wireless Modbus module aims to simplify Modbus RTU installations appeared first on CNX Software - Embedded Systems News.

Raytac AN7002Q โ€“ A smaller nRF7002 Wi-Fi 6 module for industrial IoT applications

28 September 2024 at 08:28
AN7002Q-P module

IoT solutions company Raytac has introduced the AN7002Q Wi-Fi 6 module series, which integrates Nordic Semiconductorโ€™s nRF7002 chipset and is designed for Industrial IoT, smart home, healthcare, consumer electronics, and automotive applications. They can be paired with Raytacโ€™s MDBT53 Bluetooth LE modules based on the nRF5340 multiprotocol SoC, supporting Wi-Fi and Bluetooth LE solutions. The AN7002Q is a low-power Wi-Fi 6 module supporting dual-band 2.4 GHz and 5 GHz operation with a maximum PHY data rate of 86 Mbps (MCS7). It is compatible with IEEE 802.11ax, a/b/g/n/ac standards, and connects to a host SoC or MCU via SPI or QSPI interfaces. The module also supports coexistence with Bluetooth LE, Thread, and Zigbee systems, making it ideal for IoT applications. Previously, we covered the Abluetech PTR7002, a low-power wireless module based on the Nordic Semiconductor nRF7002. The PTR7002 has a slightly larger size and offers more GPIO options, while the AN7002Q [...]

The post Raytac AN7002Q โ€“ A smaller nRF7002 Wi-Fi 6 module for industrial IoT applications appeared first on CNX Software - Embedded Systems News.

โŒ
โŒ